Date: 17th June 2016
XLPE Insulated, LSZH Sheathed And Overall Screened, Armoured Instrumentation Cables (Multipair)
XLPE Insulated,Website:http://www.ue-cable.com, LSZH Sheathed & Overall Screened, Armoured Instrumentation Cables (Multipair)RE-2X(St)HSWAH 90?C / 300VSTANDARDSBasic design to EN 50288-7APPLICATIONInstrument cable minimizes noise and signal interference, delivering clean signals in harsh environments and general manufacturing operations.The armoured LSZH sheathed cables are generally used when the risk of mechanical damage is increased. The galvanized steel wire armour provides excellent protection. Generally, the cables are used within industrial process manufacturing plants for communication, data and voice transmission signals and services. Also used for the interconnection of electrical equipment and instruments, the LSZH sheath can reduce toxic smoke and fume emission.FIRE PERFORMANCEFlame Retardance (Single Vertical Wire Test)EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2; VDE 0482-332-1; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2);CEI 20-35/1-2; EN 50265-2-1*; DIN VDE 0482-265-2-1*Reduced Fire Propagation (Vertically-mounted bundled wires & cable test)EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3-24; VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070-2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4Halogen FreeIEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1;CEI 20-37/2-1 ; BS 6425-1*No Corrosive Gas EmissionIEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2;CEI 20-37/2-2 ; BS 6425-2*Minimum Smoke EmissionIEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2;CEI 20-37/3-1&2; EN 50268-1&2*; BS 7622-1&2*No Toxic gasesNES 02-713; NF C 20-454Sunlight ResistanceUL 1581 section 1200Oil ResistanceICEA S-73-532**Note: Asterisk * denotes superseded standard, ** denotes Test temperature +60?C, duration 4h. Retention: min 60% of tensile strength/min.60% of elongation, *** denotes optional.VOLTAGE RATING300VCABLE CONSTRUCTIONConductor:Annealed copper solid or plain copper stranded to IEC 60228 Class 2.Insulation:Extruded cross-linked XLPE compound, EN 50290. 2-29.Pairs:Two insulated conductors uniformly twisted together with a lay not exceeding 100mmBinder tape:PETP transparent tapeOverall Screen:Aluminium/polyester tape is applied over the laid up pairs metallic side down in contact with tinned copper drain wire, 0.5mm?Inner Sheath:LSZH compoundAmouring:Galvanized steel wire armourOuter Sheath:Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1 (Thermosetting LSZH compound type SW2-SW4 as per BS 7655-2.6 can be offered.). UV resistance, hydrocarbon resistance, oil resistance, anti rodent and anti termite properties can be offered as option.COLOUR CODEInsulation:Black / White, continuously numbered on white core(1, 2..)for multipair.Outer Sheath:Black or blue for intrinsically safe systemsPhysical AND THERMAL PROPERTIESTemperature Range During Operation (Fixed State):-30?C ? +90?CTemperature Range During Installation (Mobile State):-5?C ? +50?CMinimum Bending Radius:10 X Overall DiameterCONSTRUCTION PARAMETERSCable CodeRE-2X(St)HSWAHNo. of Pairsx2xCross SectionNominalInsulationThick-nessNominalInner SheathThick-nessNominal OverallDiameterOverInnerSheathNominalArmourWireDiameterNominalOuterSheathThick-nessNominal Overall DiameterApprox.WeightNo.x2xmm2mm2mmmmmmmmmmkg/km0.5mm2, MultipairRE-2X(St)HSWAH 2P0.52x2x0.50.350. 4P0.53x2x0.50.350. 5P0.54x2x0.50.351. 6P0.55x2x0.50.351. 8P0.58x2x0.50.351. 10P0.510x2x0.50.351. 12P0.512x2x0.50.351. 16P0.516x2x0.50.351. 20P0.520x2x0.50.351. 24P0.524x2x0.50.351., MultipairRE-2X(St)HSWAH 2P0.752x2x0.750.380. 4P0.753x2x0.750.381. 5P0.754x2x0.750.381. 6P0.755x2x0.750.381. 8P0.758x2x0.750.381. 10P0.7510x2x0.750.381. 12P0.7512x2x0.750.381. 16P0.7516x2x0.750.381. 20P0.7520x2x0.750.381.319.21.251.624.91116RE-2X(St)HSWAH 24P0.7524x2x0.750.381.320.81.251.626.712571.0mm2, MultipairRE-2X(St)HSWAH 2P1.02x2x1. 4P1.03x2x1. 5P1.04x2x1. 6P1.05x2x1. 8P1.08x2x1. 10P1.010x2x1. 12P1.012x2x1. 16P1.016x2x1. 20P1.020x2x1.00.41.321.11.251.727.01316RE-2X(St)HSWAH 24P1.024x2x1.00.41.423.11.251.729.015201.3mm2, MultipairRE-2X(St)HSWAH 2P1.32x2x1.30.451. 4P1.33x2x1.30.451. 5P1.34x2x1.30.451. 6P1.35x2x1.30.451. 8P1.38x2x1.30.451. 10P1.310x2x1.30.451. 12P1.312x2x1.30.451.318.91.251.624.61110RE-2X(St)HSWAH 16P1.316x2x1.30.451.321.41.251.727.31361RE-2X(St)HSWAH 20P1.320x2x1.30.451.423.81.251.829.91599RE-2X(St)HSWAH 24P1.324x2x1.30.451.525.91.251.832.019601.5mm2, MultipairRE-2X(St)HSWAH 2P1.52x2x1.50.451. 4P1.53x2x1.50.451. 5P1.54x2x1.50.451. 6P1.55x2x1.50.451. 8P1.58x2x1.50.451. 10P1.510x2x1.50.451.318.81.251.624.51095RE-2X(St)HSWAH 12P1.512x2x1.50.451.319.71.251.725.61197RE-2X(St)HSWAH 16P1.516x2x1.50.451.422.51.251.728.41511RE-2X(St)HSWAH 20P1.520x2x1.50.451.525.01.251.831.11968RE-2X(St)HSWAH 24P1.524x2x1.50.451.527.11.251.833.22247Note : Other conductor sizes & core configurations are available upon requestElectrical PROPERTIESConductor Area Sizemm 20.50.751.01.31.5Insulation thickness (nominal)mm0.350.380.40.450.45Conductor resistance (20?C)?/km36.72518.514.212.3Insulation resistance (20?C)M?.km(Min.)5000Mutual Capacitance (1 kHz)pF/m(Max.)up to 4 pairs909090102102above 4 pairs7575758585Capacitance unbalance(1 kHz)pF/500 m (Max.)500InductancemH/km (Max.)1L / R (ratio) (max.)?H/?2525254040Operating voltage UrmsV300Test VoltageCore to CoreV1500Core to ScreenV1500
Latest News
Contact Information



1Building, Shuntai Square, High-tech zone, Jinan City, China Shandong Factory high-tech zone, zhangqiu, Jinan City, China
Jinan, 250101



Contact Form